Consumed material for OFI and DNA analyses

Deadline:31 Jul 2026, 06:30

Tender information
Скопски
Type
Contract
Procedure
Open procedure
Contract type
Framework agreement
Duration
3 years
Consumed material for OFI and DNA analyses

Distilled water

Distilled water

Еthanol 96%, Ph.Eur. 1-2,5L

Еthanol 96%, Ph.Eur. 1-2,5L

Еthanol 70%, 1-2,5L

Еthanol 70%, 1-2,5L

Acetic Acid glacial min. 99.5%, packaging from 0.5-2.5 liters

Acetic Acid glacial min. 99.5%, packaging from 0.5-2.5 liters

Hydrogen Peroxide ≥ 30%, packaging of 0.5-1 liter

Hydrogen Peroxide ≥ 30%, packaging of 0.5-1 liter

Petroleum ether GPR RECTAPUR, with a boiling point range of 40-60 degrees C, packaging of 1-2.5 liters

Petroleum ether GPR RECTAPUR, with a boiling point range of 40-60 degrees C, packaging of 1-2.5 liters

Ammonium Hydroxide (Puriss, Ph.Eur., Reag.ISO) package of 0.5-1 liter

Ammonium Hydroxide (Puriss, Ph.Eur., Reag.ISO) package of 0.5-1 liter

Chloroform 90-99.4% (stabilized with 1% ethanol), purissp.a. GC grade, packaging of 1-2.5 liters

Chloroform 90-99.4% (stabilized with 1% ethanol), purissp.a. GC grade, packaging of 1-2.5 liters

Diethyl ether (Min. 99.8% Ph.Eur), packaging of 0.5-1 liter

Diethyl ether (Min. 99.8% Ph.Eur), packaging of 0.5-1 liter

Formic acid HPLC grade (in packages of 50 – 100 mL)

Formic acid HPLC grade (in packages of 50 – 100 mL)

n-Hexane ≥99% (GC grade) for preparing solvents for explosive analysis with thin-layer chromatography, packaging of 0.5-1 liter

n-Hexane ≥99% (GC grade) for preparing solvents for explosive analysis with thin-layer chromatography, packaging of 0.5-1 liter

n-Heptane ≥99% (GC grade) for preparing solvents for explosive analysis with thin-layer chromatography, packaging of 0.5-1 liter

n-Heptane ≥99% (GC grade) for preparing solvents for explosive analysis with thin-layer chromatography, packaging of 0.5-1 liter

Sodium Fluoride ≥99% (bacteriostatic for blood samples), packaging of 100-300 grams

Sodium Fluoride ≥99% (bacteriostatic for blood samples), packaging of 100-300 grams

Canada balsam - turpentine resin from Abies balsamea, for preparations for microscopic analysis, packaging of 50-100 milliliters

Canada balsam - turpentine resin from Abies balsamea, for preparations for microscopic analysis, packaging of 50-100 milliliters

CRhodizonic acid salt (for detection of Pb), package of 1-5 grams

CRhodizonic acid salt (for detection of Pb), package of 1-5 grams

Imunodiacetic acid sodium - Chelex 100 or equivalent, in a 50-100 g package (‘dry mesh’)

Imunodiacetic acid sodium - Chelex 100 or equivalent, in a 50-100 g package (‘dry mesh’)

Capillary column (95% dimethylpolysiloxane and 5% phenyl, 30m x 0.25mm and stationary phase resolution 0.25 µm) for GC (Focus)/MS (Polaris Q) or equivalent

Capillary column (95% dimethylpolysiloxane and 5% phenyl, 30m x 0.25mm and stationary phase resolution 0.25 µm) for GC (Focus)/MS (Polaris Q) or equivalent

Capillary column (95% dimethylpolyisoxane and 5% phenyl, 30m x 0.25mm and stationary phase thickness 0.25 µm) for GC/MS Shimadzu or equivalent)

Capillary column (95% dimethylpolyisoxane and 5% phenyl, 30m x 0.25mm and stationary phase thickness 0.25 µm) for GC/MS Shimadzu or equivalent)

Consumables for a Raman spectrometer - a kit for the SERS technique that should contain at least 150-200µl of Poly-L-Lysine and GOLD COLLOID GC150UL to enhance Raman scattering

Consumables for a Raman spectrometer - a kit for the SERS technique that should contain at least 150-200µl of Poly-L-Lysine and GOLD COLLOID GC150UL to enhance Raman scattering

GS/FID and GS/MS vials (12x32mm, 1.5 mL) made of clear glass, with screw cap and PTFE/silicone septum certified - compatible with the instrument autosampler - “Shimadzu” (GCMS-Qp2010plus and GC-MS Qp 2020plus, GC-FID 2010) or equivalent, minimum pack of 100 pieces

GS/FID and GS/MS vials (12x32mm, 1.5 mL) made of clear glass, with screw cap and PTFE/silicone septum certified - compatible with the instrument autosampler - “Shimadzu” (GCMS-Qp2010plus and GC-MS Qp 2020plus, GC-FID 2010) or equivalent, minimum pack of 100 pieces

Splitless liner GCMS Shimadzu 2020 or equivalent

Splitless liner GCMS Shimadzu 2020 or equivalent

Split liner GCMS Shimadzu 2020 or equivalent

Split liner GCMS Shimadzu 2020 or equivalent

10 µl autosampler glass syringes 50mm/Ga 26/Conetip for GC/MS PolarisQ,Focus GC Termo with automatic sample loading AS 3000, Termo or equivalent

10 µl autosampler glass syringes 50mm/Ga 26/Conetip for GC/MS PolarisQ,Focus GC Termo with automatic sample loading AS 3000, Termo or equivalent

SPME hair (100mm ±0.1% PDMS-polydimethylsiloxane, manual holder)

SPME hair (100mm ±0.1% PDMS-polydimethylsiloxane, manual holder)

Cardboard boxes for kits

Cardboard boxes for kits

Headspace vials model Turbomatrix HS40 (PerkinElmer or equivalent) with dimensions 22.5x75.5mm, 20mL, compatible with the instrument's autosampler, in a pack of 100 pieces

Headspace vials model Turbomatrix HS40 (PerkinElmer or equivalent) with dimensions 22.5x75.5mm, 20mL, compatible with the instrument's autosampler, in a pack of 100 pieces

Aluminum caps with Butyl/PTFE 3.0 mm septum for Head Space model Turbomatrix HS40 (PerkinElmer or equivalent)

Aluminum caps with Butyl/PTFE 3.0 mm septum for Head Space model Turbomatrix HS40 (PerkinElmer or equivalent)

Rubber caps for 10ml glass vials with PTFE/red rubber composition, diameter 18mm and thickness 3mm

Rubber caps for 10ml glass vials with PTFE/red rubber composition, diameter 18mm and thickness 3mm

Aluminum caps for 10ml glass vials, with crimp, with an outer diameter of 20mm, a central part diameter of 11mm and a height of 7mm

Aluminum caps for 10ml glass vials, with crimp, with an outer diameter of 20mm, a central part diameter of 11mm and a height of 7mm

Plastic urine container with screw cap, with a volume of 120-150ml

Plastic urine container with screw cap, with a volume of 120-150ml

Medical cotton (hydrophilic, rolls)

Medical cotton (hydrophilic, rolls)

Hand-paper towel (roll) - at least 90% cellulose, white with center pull, single-ply, with sheet dimensions of min. 20x22cm and a roll weight of min. 400g

Hand-paper towel (roll) - at least 90% cellulose, white with center pull, single-ply, with sheet dimensions of min. 20x22cm and a roll weight of min. 400g

Surface disinfectant in 0.5–1.5 L packaging with active chlorine content: at least 40 g/L (Active substance: sodium hypochlorite). Should not contain additives or fragrant components

Surface disinfectant in 0.5–1.5 L packaging with active chlorine content: at least 40 g/L (Active substance: sodium hypochlorite). Should not contain additives or fragrant components

Hand sanitizer, in packaging from 200ml to 500ml, with active ingredients per 100g: Propan-2-ol 40-45g, propan-1-ol 20-35g, mecetronium methylsulphate 0.1-0.3g

Hand sanitizer, in packaging from 200ml to 500ml, with active ingredients per 100g: Propan-2-ol 40-45g, propan-1-ol 20-35g, mecetronium methylsulphate 0.1-0.3g

Liquid detergent for hand washing laboratory glassware in packs of at least 2 liters, with a composition of up to 30% phosphates, more than 5% anionic and amphoteric surfactants, chelating agents, corrosion inhibitors, and auxiliary agents

Liquid detergent for hand washing laboratory glassware in packs of at least 2 liters, with a composition of up to 30% phosphates, more than 5% anionic and amphoteric surfactants, chelating agents, corrosion inhibitors, and auxiliary agents

Hanzaplast (piece) with minimum dimensions 15mm x 70mm

Hanzaplast (piece) with minimum dimensions 15mm x 70mm

Protective adhesive sticky path 40-45 x 89-90cm in a pack with at least 60 pieces

Protective adhesive sticky path 40-45 x 89-90cm in a pack with at least 60 pieces

Non-alcoholic wipes for disinfection – individually packed pieces

Non-alcoholic wipes for disinfection – individually packed pieces

Analytical standard for TATP - Triacetone triperoxide with a minimum content of ≥0.1 mg/ml or equivalent

Analytical standard for TATP - Triacetone triperoxide with a minimum content of ≥0.1 mg/ml or equivalent

Ethanol solutions in 0.5-1.2 mL packaging, standard for blood and urine alcohol analysis, in a package with at least 10 ampoules

Ethanol solutions in 0.5-1.2 mL packaging, standard for blood and urine alcohol analysis, in a package with at least 10 ampoules

Fast Blue B salt, pack of 50-100 grams

Fast Blue B salt, pack of 50-100 grams

cobalt II thiocyanate for visualization (package 10-25g)

cobalt II thiocyanate for visualization (package 10-25g)

BSTFA + 1% TMCS, 25ml pack

BSTFA + 1% TMCS, 25ml pack

Tin containers with a lid that closes with pressure, with volume

Tin containers with a lid that closes with pressure, with volume

Plastic zipper bags

Plastic zipper bags

Paper bags

Paper bags

Thermal labels, two-row 50-h 30-R76 1/5000

Thermal labels, two-row 50-h 30-R76 1/5000

Protective shoe covers (for single use) – made of three-layer SMS material, bottom part with traction lines, latex-free

Protective shoe covers (for single use) – made of three-layer SMS material, bottom part with traction lines, latex-free

Nitrile gloves without talc

Nitrile gloves without talc

White work cotton coats with long sleeves

White work cotton coats with long sleeves

Protective disposable nylon sleeves

Protective disposable nylon sleeves

Wet wipes with the active ingredient HLD4H, alcohol-free, intended for disinfecting surfaces like glass, metal, ceramics, plastic, rubber, etc., designed for denaturing DNA/RNA

Wet wipes with the active ingredient HLD4H, alcohol-free, intended for disinfecting surfaces like glass, metal, ceramics, plastic, rubber, etc., designed for denaturing DNA/RNA

Immunochromatographic test cassettes for rapid detection of PSA (prostate specific antigen) and detection of human alpha-amylase from saliva in forensic samples of secretion traces (cut off ≤ 1 ng/ml) – Duplex PSA and Amylase test

Immunochromatographic test cassettes for rapid detection of PSA (prostate specific antigen) and detection of human alpha-amylase from saliva in forensic samples of secretion traces (cut off ≤ 1 ng/ml) – Duplex PSA and Amylase test

Proteinase K (≥30 units/milligram) – lyophilized, in a 0.05-0.1 g package

Proteinase K (≥30 units/milligram) – lyophilized, in a 0.05-0.1 g package

Anti-Dog Serum

Anti-Dog Serum

Anti-Bear Serum

Anti-Bear Serum

Anti-Cow Serum

Anti-Cow Serum

Reagent/kit intended for the rapid preparation of forensic samples for DNA analysis that eliminates the step of traditional preparation (classic DNA extraction and purification) of the sample, allowing the processing of a larger number of samples.

Reagent/kit intended for the rapid preparation of forensic samples for DNA analysis that eliminates the step of traditional preparation (classic DNA extraction and purification) of the sample, allowing the processing of a larger number of samples.

Aluminum containers for cyanoacrylate, 4-5 cm in diameter.

Aluminum containers for cyanoacrylate, 4-5 cm in diameter.

Biometric kit compatible with HID LScan™ 1000 device

Biometric kit compatible with HID LScan™ 1000 device

Filter paper in a stack (dimensions 580x580mm ±0.1%, weight 80g/m2 ±0.1%) packed in at least 250 pieces

Filter paper in a stack (dimensions 580x580mm ±0.1%, weight 80g/m2 ±0.1%) packed in at least 250 pieces

Sheets for gunpowder test

Sheets for gunpowder test

Dispenser for bottles with chemicals (organic solvents, bases, acids).

Dispenser for bottles with chemicals (organic solvents, bases, acids).

Sterile or suitable for UV decontamination, single-use surface, intended for work in a molecular laboratory (suitable for working in a laminar flow without disrupting the airflow).

Sterile or suitable for UV decontamination, single-use surface, intended for work in a molecular laboratory (suitable for working in a laminar flow without disrupting the airflow).

Sterile disposable scalpels size 10 (for handle no.3), individually packed

Sterile disposable scalpels size 10 (for handle no.3), individually packed

Sterile disposable scalpels size 22 (for handle no. 4), individually packaged

Sterile disposable scalpels size 22 (for handle no. 4), individually packaged

Metal scalpel holders with a total length of 10-15 cm (No.3) made of stainless steel, with replaceable scalpels

Metal scalpel holders with a total length of 10-15 cm (No.3) made of stainless steel, with replaceable scalpels

Metal scalpel holders with a total length of 10-15cm (No.4) made of stainless steel, with replaceable scalpels

Metal scalpel holders with a total length of 10-15cm (No.4) made of stainless steel, with replaceable scalpels

A sterile bottle with a dropper, made of polyethylene or polypropylene (flexible, easy to squeeze) with a capacity of 5-30 ml, with a screw cap and a dropper with a narrow tip for dosing (drop by drop).

A sterile bottle with a dropper, made of polyethylene or polypropylene (flexible, easy to squeeze) with a capacity of 5-30 ml, with a screw cap and a dropper with a narrow tip for dosing (drop by drop).

Plastic sterile tips with a filter, compatible with Eppendorf brand or equivalent automatic pipettes, packed in boxes of at least 96 pieces with a volume of 20-200µL

Plastic sterile tips with a filter, compatible with Eppendorf brand or equivalent automatic pipettes, packed in boxes of at least 96 pieces with a volume of 20-200µL

Capillary column (95% dimethylpolysiloxane and 5% phenyl, 30m x 0.25mm and stationary phase thickness 0.25 µm for GC/MS Shimadzu or equivalent)

Capillary column (95% dimethylpolysiloxane and 5% phenyl, 30m x 0.25mm and stationary phase thickness 0.25 µm for GC/MS Shimadzu or equivalent)

Glass test tubes 13x100mm ±0.1%

Glass test tubes 13x100mm ±0.1%

weighing paper (weighing paper / weighing boats 50x50mm and 100x100mm) smooth, non-porous, antistatic, in packs of 100-500 pieces

weighing paper (weighing paper / weighing boats 50x50mm and 100x100mm) smooth, non-porous, antistatic, in packs of 100-500 pieces

large anti-static weighing containers made of smooth non-porous material in packs of 100-500 pieces (volume of 300-500 ml)

large anti-static weighing containers made of smooth non-porous material in packs of 100-500 pieces (volume of 300-500 ml)

Spent materials and reagents for the Gesan 200 biochemical analyzer

Spent materials and reagents for the Gesan 200 biochemical analyzer

Kits for amplification of STR autosomal chromosomes

Kits for amplification of STR autosomal chromosomes

Kits for direct amplification of STR on autosomal chromosomes

Kits for direct amplification of STR on autosomal chromosomes

Kits for qualitative and quantitative determination of human DNA from forensic samples applicable to ABI RT 7500 or equivalent

Kits for qualitative and quantitative determination of human DNA from forensic samples applicable to ABI RT 7500 or equivalent

Lyophilized controls for qualitative and quantitative determination of human DNA from forensic samples applicable to ABI RT 7500 or equivalent

Lyophilized controls for qualitative and quantitative determination of human DNA from forensic samples applicable to ABI RT 7500 or equivalent

Kits for amplification of Y chromosome STR

Kits for amplification of Y chromosome STR

Consumables for ABI 3500 genetic analyzer or equivalent

Consumables for ABI 3500 genetic analyzer or equivalent

DNA automatic extraction kit with AutomateExpress robot or equivalent

DNA automatic extraction kit with AutomateExpress robot or equivalent

Kits and consumables intended for automatic DNA extraction from samples in sexual offense cases

Kits and consumables intended for automatic DNA extraction from samples in sexual offense cases

Kits for automatic DNA extraction with EZ1/EZ2 robot or equivalent

Kits for automatic DNA extraction with EZ1/EZ2 robot or equivalent

Handheld DNA extraction kit for forensic samples

Handheld DNA extraction kit for forensic samples

Manual micro punches

Manual micro punches

Adhesive optical films for covering 96-well optical reaction plates, suitable for RT ABI 7500, in packs of at least 100 pieces.

Adhesive optical films for covering 96-well optical reaction plates, suitable for RT ABI 7500, in packs of at least 100 pieces.

TE buffer, for molecular biology analysis (without DNases, RNases, and proteases) with pH ~8.0, consisting of 10mM Tris containing 1mM EDTA, in a package (piece) of 50-1050ml.

TE buffer, for molecular biology analysis (without DNases, RNases, and proteases) with pH ~8.0, consisting of 10mM Tris containing 1mM EDTA, in a package (piece) of 50-1050ml.

RT ABI 7500 spectral calibration kit, which contains at least one background plate, one ROI calibration plate, and seven spectral calibration plates with FAM™/SYBR® Green I, VIC®/JOE™, and NED™/TAMRA™/ROX™ or equivalents

RT ABI 7500 spectral calibration kit, which contains at least one background plate, one ROI calibration plate, and seven spectral calibration plates with FAM™/SYBR® Green I, VIC®/JOE™, and NED™/TAMRA™/ROX™ or equivalents

Rapid immunochemical tests for detecting drugs in saliva

Rapid immunochemical tests for detecting drugs in saliva

Buyer
Ministry of internal affairs
buyer-email@mail.com
organization number

Documents

Document name
Upload date
File size
First document.pdf
1 Jan 1970, 00:001 Bytes
Second document.pdf
1 Jan 1970, 00:001 Bytes
Open for offers
13 days left
Important dates
16 Jul - Publication date
31 Jul - Deadline
Unlock Full Access with Mercell Bidding Business Plus
Start your free trial to explore exclusive features that help you win more tenders, faster:
AI-Powered Tender Insights
Buyer Contact Info
Key Tender Timelines

Already have an account?

Mercell Logo

Feel free to reach out!

Mercell is the leading European provider of e-tendering and procurement systems, and information between buyers and suppliers in the professional market.

We appreciate your input.

© Mercell Group 2026

Terms & Conditions and Privacy Notice

Mercell Group

  • Email: post@mercell.com
  • Phone: +47 21 01 88 00
  • Address: Askekroken 11, 0277 Oslo, Norway

Your privacy is important to us

We use cookies to improve your experience and evaluate each item on our site. By clicking further, you accept our use of cookies.