Packaging and Recycling Handling Facility, Linwood
The Council has not yet determined the procurement route for this project and is seeking advice from the market on the most effective approach to design, construct and commission the facility, including the net zero energy infrastructure. The Council is open to all options, including how the work is packaged, how the energy infrastructure is procured, the contract form and allocation of risk and seeks the market’s views in the questions below. The site is currently used for ad-hoc activities such as wheeled bin storage. Initial layouts show that all elements can be accommodated within around half the site, with the remainder reserved for SuDS and future expansion. Key constraints are: - The former incinerator pit, believed to be roughly backfilled in the centre of the site and unconfirmed by site investigation, so building footings should avoid this area. - Contaminated made ground to a depth of around 1.5m identified in a 2010 environmental assessment; further site investigation and remediation will be required. - Mains sewer and electrical cables along Middleton Road. The former incinerator substation (north east corner) currently powers the neighbouring transfer station, and an enquiry to SSEN is needed to establish capacity at the substation and on the local grid. - The site is zoned Green Belt but is considered a Transition Area; the Planning Authority has indicated support in principle. A SEPA waste management licence and Animal and Plant Health Agency approval (food waste) will be required.