LA3215C-UCC-CFT for the Supply of a Suite of Plasma Etcher and Plasma Deposition Tools, 4 Lots

Deadline:17 Jul 2026, 11:00

Tender information
South-East
Type
Contract
Procedure
Open procedure
Estimated value
€3,300,000
Duration
48 months
Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.

Plasma Etcher ,Silicon ,Dielectrics

Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.

Plasma Etcher ,Metals ,Piezoelectrics

Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.

Plasma Etcher ,Slow and Controllable Rate ,Atomic Layer Etch for Silicon , Dielectrics

Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.

Plasma Deposition ,PECVD

Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.

Buyer
Education Procurement Service (EPS)
buyer-email@mail.com
organization number

Documents

Document name
Upload date
File size
First document.pdf
1 Jan 1970, 00:001 Bytes
Second document.pdf
1 Jan 1970, 00:001 Bytes
Open for offers
27 days left
Important dates
17 Jun - Publication date
17 Jul - Deadline
Unlock Full Access with Mercell Bidding Business Plus
Start your free trial to explore exclusive features that help you win more tenders, faster:
AI-Powered Tender Insights
Buyer Contact Info
Key Tender Timelines

Already have an account?

Mercell Logo

Feel free to reach out!

Mercell is the leading European provider of e-tendering and procurement systems, and information between buyers and suppliers in the professional market.

We appreciate your input.

© Mercell Group 2026

Terms & Conditions and Privacy Notice

Mercell Group

  • Email: post@mercell.com
  • Phone: +47 21 01 88 00
  • Address: Askekroken 11, 0277 Oslo, Norway

Your privacy is important to us

We use cookies to improve your experience and evaluate each item on our site. By clicking further, you accept our use of cookies.